What can we help you with?
Ring Roamer Setup Guide
Install your iPad into your Sapphire Ring Roamer:
Step-by-Step Instructions
- Clean the iPad screen using a microfiber cloth to ensure there are no debris particles present.
- Orient the iPad correctly:
- Ensure the camera is positioned at the top.
- Ensure the charging port is at the bottom.
- Install the iPad:
- Place the iPad into the Ring Roamer, ensuring it is properly seated and lies flat against the glass surface.
- Prepare the back cover:
- Locate the provided USB-C charging cable.
- Connect the charging cable to the iPad.
- Tuck the cable carefully to avoid pinching when closing the cover.
- Reattach the back cover:
- Align the standoff with the screw holes.
- Install the screws, but only halfway at first.
- Once all screws are in, fully tighten them, ensuring they are hand-tightened without over-tightening.
- Calibrate the touchscreen (if necessary):
- Locate the spring-loaded pressure points designed to prevent screen damage.
- Use the provided Allen wrench to adjust the set screw pins:
- Turn counterclockwise to loosen.
- Slowly tighten clockwise until the spring lifts slightly.
- Repeat the process for all six pressure point spots.
- Note: There is an additional hidden pressure point in the middle, but it typically does not require adjustment.
- Test the touchscreen:
- Touch each corner icon to ensure it responds correctly.
- If any area is unresponsive, locate the nearest pressure point screw pin and tighten it as needed.
How to Assemble Ring Roamer Stand:
Step-by-Step Instructions
- Gather Required Items:
- AC adapter
- Extension cable
- Y splitter
- Align and Secure the Stand:
- Align the grooves of the stand to the base plate.
- Tighten the base plate to the stand using the Allen wrench.
- Adjust the Stand Height:
- Lift the stand to your desired height.
- Tighten the screw knob to lock the height in place.
- Connect the Power:
- Insert the extension cable into the stand and plug it into the AC adapter.
- Connect the Y splitter to the power LED stand and the Roamer.
- Ready for Use:
- Your Ring Roamer stand is now fully assembled and ready for your event.
How to connect and change the Ringlight Color on Your Booth Via Bluetooth:
Step-by-Step Instructions
- Download the LED Hue App:
- Go to your App Store and search for the “LED Hue” app.
- Download and open the app.
- Set Up Bluetooth:
- Open the LED Hue app and search for the “sp110 E” module.
- Select the module, ensuring a blue check mark appears next to it to confirm the connection.
- Configure the Settings:
- On the left-hand side, set “GRB.”
- On the right-hand side, set “SK6812 RGBW.”
- Set the total pixels to 600 and press Enter.
- Test the connection by observing if the colors change on the LED lights.
- Photo Booth Software Compatibility:
- The Bluetooth is compatible with Photo Flick, Photo Zap, Curator Live, or Touch Piix software.
- Open your photo booth app and navigate to the dashboard.
- Click on “LED” in the profile menu on the top left corner and select the “sp110 LED Hue” module.
- Customize or Use Presets:
- Photo Flick provides automatic presets for the LED lights.
- To customize:
- Click on the right-hand side to choose colors for specific actions.
- Set to an automatic preset or “None” if preferred.
Once configured, your LED lights are ready to use. Customize them as desired and enjoy your enhanced photo booth experience. If you have any questions, feel free to contact us.
For a walkthrough tutorial on the Booth.events/fotofliqs app please click on the link below: