Steps to follow
Step 1: Gather Your Equipment
- iPad with Booth.Events app installed
- DNP QW410 printer
- DNP WCM Plus print server
- Ethernet cable
- USB-C hub with Ethernet support
- Power adapter
Step 2: Connect the Hardware
- Plug one end of the Ethernet cable into the WCM Plus.
- Plug the other end into the USB-C hub’s Ethernet port.
- Connect the USB-C hub to the iPad.
- Plug the printer into the WCM Plus via USB.
- Power the WCM Plus using a USB-C power adapter.
Step 3: Configure the WCM Plus
- Connect a computer to the WCM Plus hotspot.
- Enter the default password (printed on the unit).
- Open a web browser and go to
192.168.1.1. - Navigate to Device > Date & Time and set the correct time.
- Under Printers, select the desired paper size (e.g., 4×4).
Step 4: Add the Printer in Booth.Events App
- Open Booth.Events and select an event.
- Go to the last page of event settings.
- Enable printing and switch to App Managed Printing.
- Select Add AirPrint Printer.
- Choose the correct printer (e.g., 4×4 if selected earlier).
Step 5: Test Printing
- Start an event in Booth.Events.
- Take a test photo and apply any desired effects.
- Press the print button and verify the output.
- If printing is slow, check the Ethernet and power connections.
Final Checks
Make sure your iPad stays connected to an internet source via Wi-Fi while using Ethernet for printing. If you encounter issues, check our Knowledge Base or reach out for support. Happy Printing!
